YT Series Integrated Stepper Motor NEMA 8 Closed Loop 0.04Nm with 12-24VDC Drive & 1000CPR Encoder
Key Features
- Power supply voltage: 8-24VDC
- Full closed loop: 1000 lines (4000 Counts) encoder feedback
- Support torque mode: collision back to the original, constant torque, clamping object
- Full operation mode compatibility: IO control, pulse control, command control, internal programming
- Input compatible: 5-24VDC, output collector OC output, withstand voltage 30VDC
- Comprehensive protection: overvoltage, undervoltage, overcurrent, open winding, position deviation
- Non-volatile storage: Configuration parameters are stored in FLASH inside the MCU
- Filter frequency range: 50K-5M optional, factory default 300KHZ
- Speed up to 3000 RPM: distance over 10000000 RPM (200steps/rev)
- The upper computer has a friendly interface and comprehensive functions
Electrical Specification
- Part Number: 20HS38-EC-YT
- Holding Torque: 0.04Nm(5.6oz.in)
- Drive Input Voltage: 8-24VDC
- Drive Output PCurrent: 0.2-2.0A
- Drive Microstep Resolution: 200-1,000,000 steps/rev
- Drive Logic Input Voltage: 5-24V
- Encoder Type: Incremental
- Encoder Output Type: Differential
- Encoder Resolution: 1000CPR
- Encoder Signal Channels: 3
Physical Specification
- Frame Size: 20x20mm
- Overall Length: 52.5mm
- Shaft Diameter: Φ4mm
- Shaft Length: 18mm
- D-cut Length: 15mm
- Weight: 0.08kg
Ask Question About Product
Note: HTML is not translated!
