This new NEMA 17 stepper motor has a body length of 22mm and a strong torque output 0.14Nm. It also has a 4-pin JST XH Plug Connector at the end of cable. And it is an ideal stepper motor for Titan 3D printers, drive extruder, as well as other 3D printin, CNC milling or robotics applications.
Electrical Specification
Part Number: 42HS22-104A1XH
Step Angle: 1.8deg
Bi/Unipolar: Bipolar
Holding Torque: 0.14Nm
Rated Current/phase: 1.0A
Phase Resistance: 4.1ohms
Inductance: 3.6mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: 42x42mm
Body Length: 22mm
Shaft Diameter: Φ5mm
Shaft Length: 20mm
D-cut Length: 16.5mm
Number of Leads: 4
Lead Length: 1000mm
Weight: 180g
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.14 |
| Holding Torque(oz.in) | 19.8 |
| Rated Current(A) | 1.0 |
| Phase Resistance(ohm) | 4.1 |
| Phase Inductance(mH) | 3.6 |
| Physical Specification | |
| Frame Size(mm) | 42x42 |
| Body Length(mm) | 22 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 20 |
| No. of Leads | 4 |
| Lead Length(mm) | 1000 |
| Weight(KG) | 0.18 |
