This compact size 42mm NEMA 17 permanent stepping motor has a 7.5° step angle(48 steps/revolution) and a ultrthin body length 22.2mm. Each phase draws current 0.17A, allowing for a holding torque of 0.05Nm/7.1oz.in.
Electrical Specification
- Part Number: 42HS22-0186C1
- Step Angle: 7.5deg
- Holding Torque: 0.05Nm/7.1oz.in
- Rated Current/phase: 0.17A
- Phase Resistance: 70ohms
- Inductance: 50.9mH
- Driving Voltage: 12V
Physical Specification
- Frame Size: Φ42mm
- Body Length: 22.2mm
- Shaft Diameter: Φ3mm
- Shaft Length: 12mm
- Number of Leads: 6
- Lead Length: 500mm
- Weight: 60g
Contact Us
| Electrical Specification | |
| Step Angle(°) | 7.5 |
| Holding Torque(Nm) | 0.05 |
| Holding Torque(oz.in) | 7.1 |
| Rated Current(A) | 0.17 |
| Phase Resistance(ohm) | 70 |
| Phase Inductance(mH) | 50.9 |
| Driving Voltage(VDC) | 12 |
| Physical Specification | |
| Frame Size(mm) | Φ42 |
| Body Length(mm) | 22.2 |
| Shaft Type | Round |
| Shaft Diameter(mm) | 3 |
| Shaft Length(mm) | 12 |
| No. of Leads | 6 |
| Lead Length(mm) | 500 |
| Weight(KG) | 0.06 |
