This is round nema 14 stepper motor with stel angle 1.8deg and body length 20mm. It has 4 wires, each phase draws 1.0A and holding torque 0.12Nm(17oz.in).
Electrical Specification
Part Number: 35HR20-1004S
Step Angle: 1.8deg
Bi/Unipolar: Bipolar
Holding Torque: 0.12Nm(17oz.in)
Rated Current/phase: 1.0A
Phase Resistance: 10.0ohms
Inductance: 6.0mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: Φ36.5mm
Body Length: 20mm
Shaft Diameter: Φ5mm
Shaft Length: 22mm
D-cut Length: 17mm
Number of Leads: 4
Lead Length: 500mm
Weight: 100g
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.12 |
| Holding Torque(oz.in) | 17.0 |
| Rated Current(A) | 1.0 |
| Phase Resistance(ohm) | 10.0 |
| Phase Inductance(mH) | 6.5 |
| Physical Specification | |
| Frame Size(mm) | Φ36.5 |
| Body Length(mm) | 20 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 22 |
| No. of Leads | 4 |
| Lead Length(mm) | 500 |
| Weight(KG) | 0.10 |
