This is round nema 14 stepper motor with step angle 1.8deg and size Φ36.5x17mm. It has 4 wires, each phase draws 1A with holding torque 0.1Nm(14.2oz.in).
Electrical Specification
Part Number: 36HR17-1004S
Step Angle: 1.8deg
Bi/Unipolar: Bipolar
Holding Torque: 0.1Nm(14.2oz.in)
Rated Current/phase: 1.0A
Phase Resistance: 10ohms
Inductance: 6.0mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: Φ36.5mm
Body Length: 17mm
Shaft Diameter: Φ5mm
Shaft Length: 15mm
D-cut Length: 10mm
Number of Leads: 4
Lead Length: 300mm
Weight: 100g
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.1 |
| Holding Torque(oz.in) | 14.2 |
| Rated Current(A) | 1.0 |
| Phase Resistance(ohm) | 10.0 |
| Phase Inductance(mH) | 6.0 |
| Physical Specification | |
| Frame Size(mm) | Φ36.5 |
| Body Length(mm) | 17 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 15 |
| No. of Leads | 4 |
| Lead Length(mm) | 300 |
| Weight(KG) | 0.1 |
