This is round nema 14 stepper motor with step angle 0.9deg and size Φ36.5x20mm. It has 4 wires, each phase draws 0.65A with holding torque 0.08Nm(11.3oz.in).
Electrical Specification
Part Number: 36HR20-0654S
Step Angle: 0.9deg
Bi/Unipolar: Bipolar
Holding Torque: 0.08Nm(11.3oz.in)
Rated Current/phase: 0.65A
Phase Resistance: 7.0hms
Inductance: 6.0mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: Φ36mm
Body Length: 19.7mm
Shaft Diameter: Φ5mm
Shaft Length: 15mm
D-cut Length: 10mm
Number of Leads: 4
Lead Length: 300mm
Weight: 130g
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 0.9 |
| Holding Torque(Nm) | 0.08 |
| Holding Torque(oz.in) | 11.3 |
| Rated Current(A) | 0.65 |
| Phase Resistance(ohm) | 7.0 |
| Phase Inductance(mH) | 6.0 |
| Physical Specification | |
| Frame Size(mm) | Φ36.5 |
| Body Length(mm) | 19.7 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 15 |
| No. of Leads | 4 |
| Lead Length(mm) | 300 |
| Weight(KG) | 0.13 |
