This dual shaft nema 14 stepper motor has 34mm body length, each phase draws 1A with holding torque 0.14Nm(19.8oz.in). A length of 15mm rear shaft and protecive cable are available.
Electrical Specification
Part Number: 35HP34-1004D
Step Angle: 1.8deg
Bi/Unipolar: Bipolar
Holding Torque: 0.14Nm(19.8oz.in)
Rated Current/phase: 1.0A
Phase Resistance: 2.7ohms
Inductance: 4.3mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: 35x35mm
Body Length: 34mm
Shaft Diameter: Φ5mm
Front Shaft Length: 24mm
D-cut Length: 15m
Rear Shaft Length: 15mm
D-cut Length: 14m
Number of Leads: 4
Lead Length: 540mm
Weight: 200g
Motor Connenction
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.14 |
| Holding Torque(oz.in) | 19.8 |
| Rated Current(A) | 1.0 |
| Phase Resistance(ohm) | 2.7 |
| Phase Inductance(mH) | 4.3 |
| Physical Specification | |
| Frame Size(mm) | 35x35 |
| Body Length(mm) | 34 |
| Single Shaft/Dual Shaft | Dual Shaft |
| Front Shaft Diameter(mm) | 5 |
| Front Shaft Length(mm) | 24 |
| Rear Shaft Diameter(mm) | 5 |
| Rear Shaft Length(mm) | 15 |
| No. of Leads | 4 |
| Lead Length(mm) | 540 |
| Weight(KG) | 0.2 |
