This is nema 8 stepper motor with step angle 1.8deg and size 20x20x33mm. It has 4 wires, each phase draws 0.6A with holding torque 0.02Nm(2.8oz.in). Pleaset note this motor has a 15.4mm bolt spacing & 16mm pilot circle.
Electrical Specification
Part Number: 20HS33-0604S
Step Angle: 1.8deg
Bipolar/Unipolar: Bipolar
Holding Torque: 0.03Nm(4.2oz.in)
Rated Current/phase: 0.6A
Phase Resistance: 6.5ohms
Inductance: 2.2mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: 20x20mm
Body Length: 33mm
Shaft Diameter: Φ4mm
Shaft Length: 10mm
D-cut Length: 7mm
Number of Leads: 4
Lead Length: 300mm
Weight: 70g
Motor Connection
Contact Us
Electrical Specification | |
Bipolar/Unipolar | Bipolar |
Step Angle(°) | 1.8 |
Holding Torque(Nm) | 0.03 |
Holding Torque(oz.in) | 4.2 |
Rated Current(A) | 0.6 |
Phase Resistance(ohm) | 2.2 |
Phase Inductance(mH) | 6.5 |
Physical Specification | |
Frame Size(mm) | 20x20 |
Body Length(mm) | 33 |
Shaft Type | D-cut |
Single Shaft/Dual Shaft | Single Shaft |
Shaft Diameter(mm) | 4 |
Shaft Length(mm) | 10 |
No. of Leads | 4 |
Lead Length(mm) | 300 |
Weight(KG) | 0.08 |