This small hybrid bipolar stepping motor has a 1.8° step angle(200 steps/revolution). Each phase draws current 0.2A, allowing for a holding torque of 0.015/2.13oz.in. Please noet this motor has a 15.4mm bolt spacing & 16.0mm pilot circle.
Electrical Specification
- Part Number: 20HB28-0204S
- Step Angle: 1.8deg
- Bipolar/Unipolar: Bipolar
- Holding Torque: 0.015Nm/2.13oz.in
- Rated Current/phase: 0.2A
- Phase Resistance: 22.0ohms
- Inductance: 6.0mH
- Driving Voltage: 12-24VDC
Physical Specification
- Frame Size: 20x20mm
- Body Length: 28mm
- Shaft Type: Round
- Shaft Diameter: Φ4mm
- Shaft Length: 10mm
- Number of Leads: 4
- Lead Length: 300mm
- Weight:0.06kg
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.015 |
| Holding Torque(oz.in) | 2.13 |
| Rated Current(A) | 0.2 |
| Phase Resistance(ohm) | 22.0 |
| Phase Inductance(mH) | 6.0 |
| Driving Voltage(VDC) | 12-24 |
| Physical Specification | |
| Frame Size(mm) | 20x20 |
| Body Length(mm) | 28 |
| Shaft Type | Round |
| Shaft Diameter(mm) | 4 |
| Shaft Length(mm) | 10 |
| No. of Leads | 4 |
| Lead Length(mm) | 300 |
| Weight(KG) | 0.06 |
