This is the biggest CNC nema 42 stepper motor DUAL SHAFT we have. It has size 110x110x201mm with 4 wires, each phase drawing current 8.0A with huge torque up to 30Nm/4260oz.in. A length of 55m rear shaft is available for mounting encoder, hand wheel or equals.
Electrical Specification
- Part Number: 110HS201-8004D
- Step Angle: 1.8deg
- Bi/Unipolar: Bipolar
- Holding Torque: 30Nm/4260oz.in
- Rated Current/phase: 8.0A
- Phase Resistance: 0.7ohms
- Inductance: 13.5mH
- Driving Voltage: 110-220VAC
Physical Specification
- Frame Size: 110x110mm
- Body Length: 201mm
- Shaft Diameter: Φ19mm
- Front Shaft Length: 55mm
- keyway Shaft Length: 35mm
- Rear Shaft Length: 55mm
- keyway Shaft Length: 35mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 12.5kg
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 30 |
| Holding Torque(oz.in) | 4260 |
| Rated Current(A) | 8.0 |
| Phase Resistance(ohm) | 0.7 |
| Phase Inductance(mH) | 13.5 |
| Driving Voltage(VAC) | 110-220 |
| Physical Specification | |
| Frame Size(mm) | 110x110 |
| Body Length(mm) | 201 |
| Shaft Type | Keyway |
| Single Shaft/Dual Shaft | Dual Shaft |
| Front Shaft Diameter(mm) | 19 |
| Front Shaft Length(mm) | 55 |
| Rear Shaft Diameter(mm) | 19 |
| Rear Shaft Length(mm) | 55 |
| No. of Leads | 4 |
| Lead Length(mm) | 500 |
| Weight(KG) | 12 |
