This electric dc motor is bipolar NEMA 24 stepper motor with step angle 1.8degree/200 steps per revolution and 65mm body length. It has 4 wires, each phase drawing 4.0A with holding torque 2Nm/284oz.in.
Electrical Specification
- Part Number: 60HS65-4004S
- Step Angle: 1.8deg
- Bi/unipolar: Bipolar
- Holding Torque: 2Nm/284oz.in
- Rated Current/phase: 4.0A
- Phase Resistance: 0.5ohms
- Inductance: 1.8mH
- Driving Voltage: 24-72V
Physical Specification
- Frame Size: 60x60mm
- Body Length: 65mm
- Shaft Diameter: Φ8mm
- Shaft Length: 21mm
- D-cut Length: 15mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 0.8kg
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 2.0 |
| Holding Torque(oz.in) | 284 |
| Rated Current(A) | 4.0 |
| Phase Resistance(ohm) | 0.5 |
| Phase Inductance(mH) | 1.8 |
| Driving Voltage(VDC) | 24-72 |
| Physical Specification | |
| Frame Size(mm) | 60x60 |
| Body Length(mm) | 65 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 8 |
| Shaft Length(mm) | 21 |
| No. of Leads | 4 |
| Lead Length(mm) | 500 |
| Weight(KG) | 0.8 |
