This is unipolar NEMA 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 6 wires, each phase draws 1.0A with holding torque 0.9Nm/127.8oz.in).
Electrical Specification
- Part Number: 57HS56-1006S
- Step Angle: 1.8deg
- Bipolar/Unipolar: Unipolar
- Holding Torque: 0.9Nm/127.8oz.in
- Rated Current/phase: 1.0A
- Phase Resistance: 7.4ohms
- Inductance: 10mH
- Driving Voltage: 24-72V
Physical Specification
- Frame Size: 57x57mm
- Body Length: 56mm
- Shaft Diameter: Φ6.35mm
- Shaft Length: 21mm
- D-cut Length: 15mm
- Number of Leads: 6
- Lead Length: 500mm
- Weight: 0.7kg
Contact Us
Electrical Specification | |
Bipolar/Unipolar | Unipolar |
Step Angle(°) | 1.8 |
Holding Torque(Nm) | 0.9 |
Holding Torque(oz.in) | 127.8 |
Rated Current(A) | 1.0 |
Phase Resistance(ohm) | 7.4 |
Phase Inductance(mH) | 10.0 |
Driving Voltage(VDC) | 24-72 |
Physical Specification | |
Frame Size(mm) | 57x57 |
Body Length(mm) | 56 |
Shaft Type | D-cut |
Shaft Diameter(mm) | 6.35 |
Shaft Length(mm) | 21 |
No. of Leads | 6 |
Lead Length(mm) | 500 |
Weight(KG) | 0.7 |