This is unipolar nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 6 wires, each phase draws 1A with holding torque 0.9Nm(127oz.in).
Electrical Specification
Part Number: 57HS56-1006S
Step Angle: 1.8deg
Bipolar/Unipolar: Unipolar
Holding Torque: 0.9Nm(127oz.in)
Rated Current/phase: 1A
Phase Resistance: 7.4ohms
Inductance: 10mH
Driving Voltage: 24-48VDC
Physical Specification
Frame Size: 57x57mm
Body Length: 56mm
Shaft Diameter: Φ6.35mm
Shaft Length: 21mm
D-cut Length: 18mm
Number of Leads: 6
Lead Length: 500mm
Weight: 0.7kg
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Unipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.9 |
| Holding Torque(oz.in) | 127 |
| Rated Current(A) | 1.0 |
| Phase Resistance(ohm) | 7.4 |
| Phase Inductance(mH) | 10.0 |
| Physical Specification | |
| Frame Size(mm) | 57x57 |
| Body Length(mm) | 56 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 6.35 |
| Shaft Length(mm) | 21 |
| No. of Leads | 6 |
| Lead Length(mm) | 500 |
| Weight(KG) | 0.7 |
