This unipolar nema 23 stepper motor has one holding torque 0.75Nm(102oz.in) with low rated current 1A each phase.
Electrical Specification
Part Number: 57HS51-1006S
Step Angle: 1.8deg
Bipolar/Unipolar: Unipolar
Holding Torque: 0.72Nm(102oz.in)
Rated Current/phase: 1.0A
Phase Resistance: 6.6ohms
Inductance: 8.2mH
Driving Voltage: 24-48VDC
Physical Specification
Frame Size: 57x57mm
Body Length: 51mm
Shaft Diameter: Φ6.35mm
Shaft Length: 21mm
D-cut Length: 18mm
Number of Leads: 6
Lead Length: 500mm
Weight: 0.6kg
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Unipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.72 |
| Holding Torque(oz.in) | 102 |
| Rated Current(A) | 1.0 |
| Phase Resistance(ohm) | 6.6 |
| Phase Inductance(mH) | 8.2 |
| Physical Specification | |
| Frame Size(mm) | 57x57 |
| Body Length(mm) | 51 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 6.35 |
| Shaft Length(mm) | 21 |
| No. of Leads | 6 |
| Lead Length(mm) | 500 |
| Weight(KG) | 0.6 |
