This unipolar nema 23 stepper motor has one holding torque 0.4Nm(56.6oz.in) with low rated current 1A each phase.
Electrical Specification
Part Number: 57HS41-1006S
Step Angle: 1.8deg
Bipolar/Unipolar: Unipolar
Holding Torque: 0.4Nm(56.6oz.in)
Rated Current/phase: 1.0A
Phase Resistance: 5.2ohms
Inductance: 5.5mH
Driving Voltage: 24-48VDC
Physical Specification
Frame Size: 57x57mm
Body Length: 41mm
Shaft Type: D-cut
Shaft Diameter: Φ6.35mm
Shaft Length: 21mm
D-cut Length: 15mm
Number of Leads: 6
Lead Length: 500mm
Weight: 0.5kg
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Unipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.4 |
| Holding Torque(oz.in) | 56.6 |
| Rated Current(A) | 1.0 |
| Phase Resistance(ohm) | 5.2 |
| Phase Inductance(mH) | 5.5 |
| Physical Specification | |
| Frame Size(mm) | 57x57 |
| Body Length(mm) | 41 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 6.35 |
| Shaft Length(mm) | 21 |
| No. of Leads | 6 |
| Lead Length(mm) | 500 |
| Weight(KG) | 0.5 |
