This dual shaft NEMA 23 stepper motor has holding torque 3Nm/426oz.in. A ength of 15mm rear shaft is available for brake, encoder or equals mounting.
Electrical Specification
- Part Number: 57HS112-4204D
- Step Angle: 1.8 deg
- Bipolar/Unipolar: Bipolar
- Holding Torque: 3Nm/426oz.in
- Rated Current/phase: 4.2A
- Phase Resistance: 0.9ohms
- Inductance: 3.8mH
- Driving Voltage: 24-72V
Physical Specification
- Frame Size: 57x57mm
- Body Length: 112mm
- Front Shaft Diameter: Φ8mm
- Front Shaft Length: 21mm
- D-cut Length: 15mm
- Rear Shaft Diameter: Φ8mm
- Rear Shaft Length: 15mm
- D-cut Length: 14mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 1.6kg
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 3.0 |
| Holding Torque(oz.in) | 426 |
| Rated Current(A) | 4.2 |
| Phase Resistance(ohm) | 0.9 |
| Phase Inductance(mH) | 3.8 |
| Driving Voltage(VDC) | 24-72 |
| Physical Specification | |
| Frame Size(mm) | 57x57 |
| Body Length(mm) | 112 |
| Single Shaft/Dual Shaft | Dual Shaft |
| Front Shaft Diameter(mm) | 8 |
| Front Shaft Length(mm) | 21 |
| Rear Shaft Diameter(mm) | 8 |
| Rear Shaft Length(mm) | 15 |
| No. of Leads | 4 |
| Lead Length(mm) | 500 |
| Weight(KG) | 1.6 |
