This NEMA 23 cnc stepper motor has holding torque 2.4Nm/340oz.in with body length 84mm. A length of 15mm rear shaft is available.
Electrical Specification
Part Number: 57HP84-4004D
Step Angle: 1.8deg
Bipolar/Unipolar: Bipolar
Holding Torque: 2.4Nm(340oz.in)
Rated Current/phase: 4.0A
Phase Resistance: 0.9ohms
Inductance: 3.4mH
Driving Voltage: 24-48VDC
Physical Specification
Body Length: 84mm
Shaft Diameter: Φ8mm
Front Shaft Length: 21mm
Rear Shaft Length: 15mm
Number of Leads: 4
Lead Length: 500mm
Weight: 1.4kg
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 2.4 |
| Holding Torque(oz.in) | 340 |
| Rated Current(A) | 4.0 |
| Phase Resistance(ohm) | 0.9 |
| Phase Inductance(mH) | 3.4 |
| Physical Specification | |
| Frame Size(mm) | 57x57 |
| Body Length(mm) | 84 |
| Single Shaft/Dual Shaft | Dual Shaft |
| Shaft Diameter(mm) | 8 |
| Front Shaft Length(mm) | 21 |
| Rear Shaft Length(mm) | 15 |
| No. of Leads | 4 |
| Lead Length(mm) | 500 |
| Weight(KG) | 1.4 |
