This is one of the most popular NEMA 23 CNC stepper motor with 65mm body length. It has 4 wires, each phase draws 3.0A, with a good holding torque 1.5Nm/213oz.in, suitable for medecal device and CNC machines.
Electrical Specification
- Part Number: 57HS65-3004S
- Step Angle: 1.8deg
- ipolar/Unipolar: Bipolar
- Holding Torque: 1.5Nm/213oz.in
- Rated Current/phase: 2.8A
- Phase Resistance: 0.65ohms
- Inductance: 3.2mH
- Driving Voltage: 24-72V
Physical Specification
- Frame Size: 57x57mm
- Body Length: 65mm
- Shaft Diameter: Φ8mm
- Shaft Length: 21mm
- D-cut Length: 18mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 0.8kg
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 1.5 |
| Holding Torque(oz.in) | 213 |
| Rated Current(A) | 3.0 |
| Phase Resistance(ohm) | 0.65 |
| Phase Inductance(mH) | 3.2 |
| Driving Voltage(VDC) | 24-72 |
| Physical Specification | |
| Frame Size(mm) | 57x57 |
| Body Length(mm) | 65 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 8 |
| Shaft Length(mm) | 21 |
| No. of Leads | 4 |
| Lead Length(mm) | 500 |
| Weight(KG) | 0.8 |
