This is bipolar NEMA 23 stepper motor with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws a low current 1.0A with holding torque 0.9Nm/127.8oz.in. A Plug type lead is available for this motor.
Electrical Specification
- Part Number: 57HS76-1004S
- Step Angle: 1.8deg
- Bipolar/Unipolar: Bipolar
- Holding Torque: 0.9Nm/127.8oz.in
- Rated Current/phase: 1.0A
- Phase Resistance: 1.1ohms
- Inductance: 4.5mH
- Driving Voltage: 24-72V
Physical Specification
- Frame Size: 57x57mm
- Body Length: 76mm
- Shaft Diameter: Φ6.35mm
- Shaft Length: 23.5mm
- D-cut Length: 18mm
- Number of Leads: 4
- Lead Length: 1000mm
- Weight: 1.1KG
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.9 |
| Holding Torque(oz.in) | 127.8 |
| Rated Current(A) | 1.0 |
| Phase Resistance(ohm) | 1.1 |
| Phase Inductance(mH) | 4.5 |
| Driving Voltage(VDC) | 24-72 |
| Physical Specification | |
| Frame Size(mm) | 57x57 |
| Body Length(mm) | 76 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 6.35 |
| Shaft Length(mm) | 23.5 |
| No. of Leads | 4 |
| Lead Length(mm) | 1000 |
| Weight(KG) | 1.1 |
