This is bipolar NEMA 23 stepper motor with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws a low current 1A with holding torque 0.9Nm(127oz.in). A Plug type lead is available for this motor.
Electrical Specification
Part Number: 57HS76-1004X
Step Angle: 1.8deg
Bipolar/Unipolar: Bipolar
Holding Torque: 0.9Nm(127oz.in)
Rated Current/phase: 1.0A
Phase Resistance: 1.1ohms
Inductance: 4.5mH
Driving Voltage: 24-48VDC
Physical Specification
Frame Size: 57x57mm
Body Length: 76mm
Shaft Diameter: Φ6.35mm
Shaft Length: 23.5mm
D-cut Length: 18mm
Number of Leads: 4
Lead Length: 1000mm
Weight: 1.2KG
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.9 |
| Holding Torque(oz.in) | 271 |
| Rated Current(A) | 1.0 |
| Phase Resistance(ohm) | 1.1 |
| Phase Inductance(mH) | 4.5 |
| Physical Specification | |
| Frame Size(mm) | 57x57 |
| Body Length(mm) | 76 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 6.35 |
| Shaft Length(mm) | 23.5 |
| No. of Leads | 4 |
| Lead Length(mm) | 1000 |
| Weight(KG) | 1.2 |
