This is bipolar nema 23 stepper motor with step angle 0.9deg and szie 57x57x56mm. It has 4 wires, each phase draws current 2.8A and with holding torque 1.15Nm(163oz.in) and a output shaft diameter 8mm.
Electrical Specification
Part Number: 57DM56-2804S
Step Angle: 0.9deg
Bipolar/Unipolar: Bipolar
Holding Torque: 1.15Nm(163oz.in)
Rated Current/phase: 2.8A
Phase Resistance: 1.0ohms
Inductance: 4.5mH
Driving Voltage: 24-48VDC
Physical Specification
Frame Size: 57x57mm
Body Length: 56mm
Shaft Diameter: Φ8mm
Shaft Length: 21mm
D-cut Length: 18mm
Number of Leads: 4
Lead Length: 500mm
Weight: 0.6kg
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 0.9 |
| Holding Torque(Nm) | 1.15 |
| Holding Torque(oz.in) | 163 |
| Rated Current(A) | 2.8 |
| Phase Resistance(ohm) | 1.0 |
| Phase Inductance(mH) | 4.5 |
| Physical Specification | |
| Frame Size(mm) | 57x57 |
| Body Length(mm) | 56 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 8 |
| Shaft Length(mm) | 21 |
| No. of Leads | 4 |
| Lead Length(mm) | 500 |
| Weight(KG) | 0.6 |
