This NEMA 23 stepper motor has body length 112mm, each phase draws 3A with holding torque 3Nm(425oz.in). Please note the shaft diameter is 8mm.
Electrical Specification
Part Number: 57HS112-3004S
Step Angle: 1.8deg
Bipolar/Unipolar: Bipolar
Holding Torque: 3Nm(425oz.in)
Rated Current/phase: 3.0A
Phase Resistance: 1.6ohms
Inductance: 6.8mH
Driving Voltage: 24-48VDC
Physical Specification
Frame Size: 57x57mm
Body Length: 112mm
Shaft Diameter: Φ8mm
Shaft Length: 21mm
D-cut Length: 15mm
Number of Leads: 4
Lead Length: 500mm
Weight: 1.8kg
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 3.0 |
| Holding Torque(oz.in) | 425 |
| Rated Current(A) | 3.0 |
| Phase Resistance(ohm) | 1.6 |
| Phase Inductance(mH) | 6.8 |
| Physical Specification | |
| Frame Size(mm) | 57x57 |
| Body Length(mm) | 112 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 8 |
| Shaft Length(mm) | 21 |
| No. of Leads | 4 |
| Lead Length(mm) | 500 |
| Weight(KG) | 1.8 |
