This is unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 6 wires, each phase draws current 0.4A with holding torque 0.32Nm(45.3oz.in).
Electrical Specification
Part Number: 42HS48-0406S
Step Angle: 1.8deg
Bi/Unipolar: Unipolar
Holding Torque: 0.32Nm(45.3oz.in)
Rated Current/phase: 0.4A
Phase Resistance: 30ohms
Inductance: 25mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: 42x42mm
Body Length: 48mm
Shaft Diameter: Φ5mm
Shaft Length: 24mm
D-cut Length: 15mm
Number of Leads: 6
Lead Length: 500mm
Weight: 350g
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Unipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.32 |
| Holding Torque(oz.in) | 45.3 |
| Rated Current(A) | 0.4 |
| Phase Resistance(ohm) | 25 |
| Phase Inductance(mH) | 30 |
| Physical Specification | |
| Frame Size(mm) | 42x42 |
| Body Length(mm) | 48 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 24 |
| No. of Leads | 6 |
| Lead Length(mm) | 500 |
| Weight(KG) | 0.35 |
