This prior NEMA 17 stepper motor dual shaft has one stronger holding torque output compared to standard version. In order to protect the motor leads, one black cable clamp is installed at the exit of motor wires and the harness cable is equiped.
Electrical Specification
- Part Number: 42HP48-2004B
- Step Angle: 1.8deg
- Bi/Unipolar: Bipolar
- Holding Torque: 0.6Nm/85.2oz.in
- Rated Current/phase: 2.0A
- Phase Resistance: 1.4ohms
- Inductance: 3.0mH
- Driving Voltage: 12-24V
Physical Specification
- Frame Size: 42x42mm
- Body Length: 48mm
- Front Shaft Diameter: Φ5mm
- Front Shaft Length: 24mm
- Front D-cut Length: 20mm
- Rear Shaft Diameter: Φ5mm
- Rear Shaft Length: 15mm
- Rear D-cut Length: 14.5mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 0.4kg
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.6 |
| Holding Torque(oz.in) | 85.2 |
| Rated Current(A) | 2.0 |
| Phase Resistance(ohm) | 1.4 |
| Phase Inductance(mH) | 3.0 |
| Driving Voltage(VDC) | 12-24 |
| Physical Specification | |
| Frame Size(mm) | 42x42 |
| Body Length(mm) | 48 |
| Front Shaft Diameter(mm) | 5 |
| Front Shaft Length(mm) | 24 |
| Rear Shaft Diameter(mm) | 5 |
| Rear Shaft Length(mm) | 15 |
| No. of Leads | 4 |
| Lead Length(mm) | 500 |
| Weight(KG) | 0.4 |
