This double shaft NEMA 17 stepper motor has 40mm body length and holding torque 0.45Nm/63.9oz.in with rated current 1.68A each phase. A length of 15mm rear shaft is avaiable.
Electrical Specification
- Part Number: 42HS40-1684B
- Step Angle: 1.8deg
- Bi/Unipolar: Bipolar
- Holding Torque: 0.45Nm/63.9oz.in
- Rated Current/phase: 1.68A
- Phase Resistance: 1.95ohms
- Inductance: 4.4mH
- Driving Voltage: 12-24V
Physical Specification
- Frame Size: 42x42mm
- Body Length: 40mm
- Front Shaft Diameter: Φ5mm
- Front Shaft Length: 24mm
- Front D-cut Length: 20mm
- Rear Shaft Diameter: Φ5mm
- Rear Shaft Length: 15mm
- Rear D-cut Length: 14mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 0.3kg
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.45 |
| Holding Torque(oz.in) | 63.9 |
| Rated Current(A) | 1.68 |
| Phase Resistance(ohm) | 1.95 |
| Phase Inductance(mH) | 4.4 |
| Driving Voltage(VDC) | 12-24 |
| Physical Specification | |
| Frame Size(mm) | 42x42 |
| Body Length(mm) | 40 |
| Front Shaft Diameter(mm) | 5 |
| Front Shaft Length(mm) | 24 |
| Rear Shaft Diameter(mm) | 5 |
| Rear Shaft Length(mm) | 15 |
| No. of Leads | 4 |
| Weight(KG) | 0.3 |
