This dual shaft NEMA 17 stepper motor has 34mm body length and holding torque 0.32Nm/45.44oz.in with rated current 1.33A each phase. A length of 15mm rear shaft and 1000mm Cable & JST XH Plug Connector are available for this model.
Electrical Specification
- Part Number: 42HS34-1334B
- Step Angle: 1.8deg
- Bi/Unipolar: Bipolar
- Holding Torque: 0.32Nm/45.44oz.in
- Rated Current/phase: 1.33A
- Phase Resistance: 2.7ohms
- Inductance: 4.2mH
- Driving Voltage: 12-24V
Physical Specification
- Frame Size: 42x42mm
- Body Length: 34mm
- Shaft Diameter: Φ5mm
- Front Shaft Length: 24mm
- D-cut Length: 20mm
- Rear Shaft Length: 15mm
- D-cut Length: 14mm
- Number of Leads: 4
- Lead Length: 1000mm
- Weight: 0.25kg
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.32 |
| Holding Torque(oz.in) | 45.44 |
| Rated Current(A) | 1.33 |
| Phase Resistance(ohm) | 2.7 |
| Phase Inductance(mH) | 4.2 |
| Driving Voltage(VDC) | 12-24 |
| Physical Specification | |
| Frame Size(mm) | 42x42 |
| Body Length(mm) | 34 |
| Front Shaft Diameter(mm) | 5 |
| Shaft Diameter(mm) | 5 |
| Front Shaft Length(mm) | 24 |
| Rear Shaft Diameter(mm) | 5 |
| Rear Shaft Length(mm) | 15 |
| No. of Leads | 4 |
| Lead Length(mm) | 1000 |
| Weight(KG) | 0.25 |
