This is the latest NEMA 17 stepper motor with holding torque 0.59Nm/83.78oz.in. It has a 4-pin 2.54mm pitch JST XH connector at the end of cable. Absolutely it is an ideal stepping motor for 3D printers, as well as CNC and robotics applications.
Electrical Specification
- Part Number: 42HS48-2004S-XH
- Step Angle: 1.8deg
- Bi/Unipolar: Bipolar
- Holding Torque: 0.59Nm/83.78oz.in
- Rated Current/phase: 2.0A
- Phase Resistance: 1.4ohms
- Inductance: 3.0mH
- Driving Voltage: 12-24V
Physical Specification
- Frame Size: 42x42mm
- Body Length: 48mm
- Shaft Diameter: Φ5mm
- Shaft Length: 24mm
- D-cut Length: 15mm
- Number of Leads: 4
- Lead Length: 1000mm
- Weight: 0.36kg
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.59 |
| Holding Torque(oz.in) | 83.78 |
| Rated Current(A) | 2.0 |
| Phase Resistance(ohm) | 3.0 |
| Phase Inductance(mH) | 1.4 |
| Driving Voltage(VDC) | 12-24 |
| Physical Specification | |
| Frame Size(mm) | 42x42 |
| Body Length(mm) | 48 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 24 |
| No. of Leads | 4 |
| Lead Length(mm) | 1000 |
| Weight(KG) | 0.36 |
