This NEMA 17 stepper motor has 4 wires, each phase drawing current 1.7A and holding torque 0.6Nm/85.2oz.in). The output shaft diameter is 8mm.
Electrical Specification
- Part Number: 42HS60-1704D8
- Step Angle: 1.8deg
- Bi/Unipolar: Bipolar
- Holding Torque: 0.6Nm/85.2oz.in
- Rated Current/phase: 1.7A
- Phase Resistance: 1.9ohms
- Inductance: 5.3mH
- Driving Voltage: 12-24V
Physical Specification
- Frame Size: 42x42mm
- Body Length: 60mm
- Shaft Diameter: Φ8mm
- Shaft Length: 24mm
- D-cut Length: 20mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 0.5kg
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.6 |
| Holding Torque(oz.in) | 85.2 |
| Rated Current(A) | 1.7 |
| Phase Resistance(ohm) | 1.9 |
| Phase Inductance(mH) | 5.3 |
| Driving Voltage(VDC) | 12-24 |
| Physical Specification | |
| Frame Size(mm) | 42x42 |
| Body Length(mm) | 60 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 8 |
| Shaft Length(mm) | 24 |
| No. of Leads | 4 |
| Lead Length(mm) | 500 |
| Weight(KG) | 0.5 |
