This NEMA 17 stepper motor with 22mm body length has holding torque 0.16Nm/22.72oz.in and 1.0A rated current each phase. A JST XH 2.54mm 4 Pin connector is fixed at the terminal of the wires.
Electrical Specification
- Part Number: 42HS22-1004S
- Step Angle: 1.8deg
- Bi/Unipolar: Bipolar
- Holding Torque: 0.16Nm/22.72oz.in
- Rated Current/phase: 1.0A
- Phase Resistance: 4.1ohms
- Inductance: 3.6mH
- Driving Voltage: 12-24V
Physical Specification
- Frame Size: 42x42mm
- Body Length: 22mm
- Shaft Diameter: Φ5mm
- Shaft Length: 20mm
- D-cut Length: 16.5mm
- Number of Leads: 4
- Lead Length: 1000mm
- Weight: 0.14kg
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.16 |
| Holding Torque(oz.in) | 22.72 |
| Rated Current(A) | 1.0 |
| Phase Resistance(ohm) | 4.1 |
| Phase Inductance(mH) | 3.6 |
| Physical Specification | |
| Frame Size(mm) | 42x42 |
| Body Length(mm) | 22 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 20 |
| No. of Leads | 4 |
| Lead Length(mm) | 1000 |
| Weight(KG) | 0.14 |
