This is the latest nema 17 stepper motor with holding torque 0.59Nm (83.5oz.in). It has a 4-pin 2.54mm pitch JST XH connector at the end of cable. Absolutely it is an ideal stepping motor for 3D printers, as well as CNC and robotics applications.
Electrical Specification
Part Number: 42HS48-2004S-XH
Step Angle: 1.8deg
Bi/Unipolar: Bipolar
Holding Torque: 0.59Nm(83.5oz.in)
Rated Current/phase: 2.0A
Phase Resistance: 1.4ohms
Inductance: 3.0mH
Driving Voltage: 12-36VDC
Physical Specification
Frame Size: 42x42mm
Body Length: 48mm
Shaft Diameter: Φ5mm
Shaft Length: 24mm
D-cut Length: 15mm
Number of Leads: 4
Lead Length: 1000mm
Weight: 400g
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.59 |
| Holding Torque(oz.in) | 83.5 |
| Rated Current(A) | 2.0 |
| Phase Resistance(ohm) | 3.0 |
| Phase Inductance(mH) | 1.4 |
| Physical Specification | |
| Frame Size(mm) | 42x42 |
| Body Length(mm) | 48 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 24 |
| No. of Leads | 4 |
| Lead Length(mm) | 1000 |
| Weight(KG) | 0.4 |
