This is bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x28mm. It has 4 wires, each phase draws current 0.6A with holding torque 0.12Nm (17oz.in). A Dupont 2.54mm 4pin connector is fixed at the terminal of the wires.
Electrical Specification
Part Number: 42HS28-0604S
Step Angle: 1.8deg
Bi/Unipolar: Bipolar
Holding Torque: 0.12Nm(17oz.in)
Rated Current/phase: 0.6A
Phase Resistance: 8.0ohms
Inductance: 10.0mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: 42x42mm
Body Length: 28mm
Shaft Diameter: Φ5mm
Shaft Length: 20mm
D-cut Length: 16mm
Number of Leads: 4
Lead Length: 1000mm
Weight: 190g
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.12 |
| Holding Torque(oz.in) | 17.0 |
| Rated Current(A) | 0.6 |
| Phase Resistance(ohm) | 8.0 |
| Phase Inductance(mH) | 10.0 |
| Physical Specification | |
| Frame Size(mm) | 42x42 |
| Body Length(mm) | 28 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 20 |
| No. of Leads | 4 |
| Lead Length(mm) | 1000 |
| Weight(KG) | 0.19 |
