This nema 17 stepper motor has 0.9deg step angle with size 42x42x26mm. It has 4 wires, each phase draws 1.4A with holding torque 0.18Nm (25.5oz.in). The JST XH 2.54mm 4 pins connnector is available.
Electrical Specification
Part Number: 42HM26-1404S
Step Angle: 0.9deg
Bi/Unipolar: Bipolar
Holding Torque: 0.18Nm(25.5oz.in)
Rated Current/phase: 1.4A
Phase Resistance: 2.4ohms
Inductance: 5.5mH
Driving Voltage: 12-36VDC
Physical Specification
Frame Size: 42x42mm
Body Length: 26mm
Shaft Diameter: Φ5mm
Shaft Length: 20mm
D-cut Length: 17mm
Number of Leads: 4
Lead Length: 1000mm
Weight: 240g
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 0.9 |
| Holding Torque(Nm) | 0.18 |
| Holding Torque(oz.in) | 25.5 |
| Rated Current(A) | 1.4 |
| Phase Resistance(ohm) | 2.4 |
| Phase Inductance(mH) | 5.5 |
| Physical Specification | |
| Frame Size(mm) | 42x42 |
| Body Length(mm) | 26 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 20 |
| No. of Leads | 4 |
| Lead Length(mm) | 1000 |
| Weight(KG) | 0.24 |
