This is bipolar nema 16 stepper motor with size 39x39x25mm. It has 4 wires, each phase draws 0.6A with holding torque 0.14Nm(19.8oz.in).
Electrical Specification
Part Number: 39HS25-0604S
Step Angle: 1.8deg
Bi/Unipolar: Bipolar
Holding Torque: 0.14Nm(19.8oz.in)
Rated Current/phase: 0.6A
Phase Resistance: 9.0ohms
Inductance: 10.0mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: 39x39mm
Body Length: 25mm
Shaft Diameter: Φ5mm
Shaft Length: 24mm
D-cut Length: 15mm
Number of Leads: 4
Lead Length: 300mm
Weight: 160g
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.14 |
| Holding Torque(oz.in) | 19.8 |
| Rated Current(A) | 0.6 |
| Phase Resistance(ohm) | 9.0 |
| Phase Inductance(mH) | 10.0 |
| Physical Specification | |
| Frame Size(mm) | 39x39 |
| Body Length(mm) | 25 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 24 |
| No. of Leads | 4 |
| Lead Length(mm) | 300 |
| Weight(KG) | 0.16 |
