This is bipolar nema 14 stepper motor with 28mm body and . It has 4 wires, each phase draws 0.75A with holding torque 10Ncm (14.2oz.in). A length of 500mm cable with JST XH2.54 4 PIN connector is available.
Electrical Specification
Part Number: 35HS28-0504A
Step Angle: 1.8deg
Bi/Unipolar: Bipolar
Holding Torque: 10Ncm(14.2oz.in)
Rated Current/phase: 0.5A
Phase Resistance: 20ohms
Inductance: 18mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: 35x35mm
Body Length: 28mm
Shaft Diameter: Φ5mm
Shaft Length: 24mm
D-cut Length: 15mm
Number of Leads: 4
Lead Length: 500mm
Weight: 150g
Motor Connection
Contact Us
Electrical Specification | |
Bipolar/Unipolar | Bipolar |
Step Angle(°) | 1.8 |
Holding Torque(Nm) | 0.1 |
Holding Torque(oz.in) | 14.2 |
Rated Current(A) | 0.5 |
Phase Resistance(ohm) | 20 |
Phase Inductance(mH) | 18 |
Physical Specification | |
Frame Size(mm) | 35x35 |
Body Length(mm) | 28 |
Shaft Type | D-cut |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 24 |
No. of Leads | 4 |
Lead Length(mm) | 500 |
Weight(KG) | 0.14 |