This dual shaft NEMA 14 stepper motor has 34mm body length, each phase draws 1.0A with holding torque 0.14Nm/19.88oz.in. A length of 15mm rear shaft is available.
Electrical Specification
- Part Number: 35HS34-1004B
- Step Angle: 1.8deg
- Bi/Unipolar: Bipolar
- Holding Torque: 0.14Nm/19.88oz.in
- Rated Current/phase: 1.0A
- Phase Resistance: 2.7ohms
- Inductance: 4.3mH
- Driving Voltage: 12-24VDC
Physical Specification
- Frame Size: 35x35mm
- Body Length: 34mm
- Shaft Diameter: Φ5mm
- Front Shaft Length: 24mm
- Front d-cut Length: 15m
- Rear Shaft Length: 15mm
- Rear d-cut Length: 15mm
- Number of Leads: 4
- Lead Length:540mm
- Weight: 0.17kg
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.14 |
| Holding Torque(oz.in) | 19.88 |
| Rated Current(A) | 1.0 |
| Phase Resistance(ohm) | 2.7 |
| Phase Inductance(mH) | 4.3 |
| Physical Specification | |
| Frame Size(mm) | 35x35 |
| Body Length(mm) | 34 |
| Single Shaft/Dual Shaft | Dual Shaft |
| Front Shaft Diameter(mm) | 5 |
| Front Shaft Length(mm) | 24 |
| Rear Shaft Diameter(mm) | 5 |
| Rear Shaft Length(mm) | 15 |
| No. of Leads | 4 |
| Lead Length(mm) | 540 |
| Weight(KG) | 0.17 |
