This is bipolar NEMA 14 stepper motor with 28mm body. It has 4 wires, each phase draws 1A with holding torque 0.125Nm/17.75oz.in. A length of 500mm cable with JST XH2.54 4 PIN connector is available.
Electrical Specification
- Part Number: 35HS28-1004A
- Step Angle: 1.8deg
- Bi/Unipolar: Bipolar
- Holding Torque: 0.125Nm/17.75oz.in
- Rated Current/phase: 1A
- Phase Resistance: 3.5ohms
- Inductance: 3.5mH
- Driving Voltage: 12-24VDC
Physical Specification
- Frame Size: 35x35mm
- Body Length: 28mm
- Shaft Diameter: Φ5mm
- Shaft Length: 24mm
- D-cut Length: 15mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 0.15kg
Contact Us
Electrical Specification | |
Bipolar/Unipolar | Bipolar |
Step Angle(°) | 1.8 |
Holding Torque(Nm) | 0.125 |
Holding Torque(oz.in) | 17.75 |
Rated Current(A) | 1 |
Phase Resistance(ohm) | 3.5 |
Phase Inductance(mH) | 3.5 |
Driving Voltage(VDC) | 12-24 |
Physical Specification | |
Frame Size(mm) | 35x35 |
Body Length(mm) | 28 |
Shaft Type | D-cut |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 24 |
No. of Leads | 4 |
Lead Length(mm) | 500 |
Weight(KG) | 0.15 |