This is bipolar nema 14 stepper motor with 26mm body and high inductance. It has 4 wires, each phase draws 0.4A and holding torque 0.14Nm(19.8oz.in). A JST connector XH2.54-4PIN is fixed at the terminal cable.
Electrical Specification
Part Number: 35HS26-0404A
Step Angle: 1.8deg
Bipolar/Unipolar: Bipolar
Holding Torque: 0.14Nm(19.8oz.in)
Rated Current/phase: 0.4A
Phase Resistance: 30ohms
Inductance: 30mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: 35x35mm
Body Length: 26mm
Shaft Diameter: Φ5mm
Shaft Length: 20.5mm
D-cut Length: 16.5mm
Number of Leads: 4
Lead Length: 660mm
Weight: 140g
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.14 |
| Holding Torque(oz.in) | 19.8 |
| Rated Current(A) | 0.4 |
| Phase Resistance(ohm) | 30 |
| Phase Inductance(mH) | 30 |
| Physical Specification | |
| Frame Size(mm) | 35x35 |
| Body Length(mm) | 26 |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 24 |
| No. of Leads | 4 |
| Lead Length(mm) | 660 |
| Weight(KG) | 0.14 |
