This is bipolar nema 14 stepper motor with 28mm body. It has 4 wires, each phase draws 1A with holding torque 0.125Nm(17.7oz.in). A length of 500mm cable with JST XH2.54 4 PIN connector is available.
Electrical Specification
Part Number: 35HS28-1004A
Step Angle: 1.8deg
Bi/Unipolar: Bipolar
Holding Torque: 0.125Nm(17.7oz.in)
Rated Current/phase: 1A
Phase Resistance: 3.5ohms
Inductance: 3.5mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: 35x35mm
Body Length: 28mm
Shaft Diameter: Φ5mm
Shaft Length: 24mm
D-cut Length: 15mm
Number of Leads: 4
Lead Length: 500mm
Weight: 150g
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.125 |
| Holding Torque(oz.in) | 17.7 |
| Rated Current(A) | 1 |
| Phase Resistance(ohm) | 3.5 |
| Phase Inductance(mH) | 3.5 |
| Physical Specification | |
| Frame Size(mm) | 35x35 |
| Body Length(mm) | 28 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 24 |
| No. of Leads | 4 |
| Lead Length(mm) | 500 |
| Weight(KG) | 0.15 |
