This NEMA 14 stepper motor has 0.9deg step angle with size 35x35x28mm. It has 4 wires, each phase draws 0.4A with holding torque 0.11Nm/15.62oz.in.
Electrical Specification
- Part Number: 35HM28-0404S
- Step Angle: 0.9deg
- Bi/Unipolar: Bipolar
- Holding Torque: 0.11Nm/15.62oz.in
- Rated Current/phase: 0.4A
- Phase Resistance: 25ohms
- Inductance: 24mH
- Driving Voltage: 12-24VDC
Physical Specification
- Frame Size: 35x35mm
- Body Length: 28mm
- Shaft Diameter: Φ5mm
- Shaft Length: 24mm
- D-cut Length: 15mm
- Number of Leads: 4
- Lead Length: 200mm
- Weight: 0.14kg
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 0.9 |
| Holding Torque(Nm) | 0.11 |
| Holding Torque(oz.in) | 15.62 |
| Rated Current(A) | 0.4 |
| Phase Resistance(ohm) | 25 |
| Phase Inductance(mH) | 24 |
| Driving Voltage(VDC) | 12-24 |
| Physical Specification | |
| Frame Size(mm) | 35x35 |
| Body Length(mm) | 28 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 24 |
| No. of Leads | 4 |
| Lead Length(mm) | 200 |
| Weight(KG) | 0.14 |
