This nema 14 stepper motor has 0.9deg step angle with size 35x35x20mm. It has 4 wires, each phase draws 1.0A with holding torque 0.05Nm(7.1oz.in).
Electrical Specification
Part Number: 35HM20-1004S
Step Angle: 0.9deg
Bi/Unipolar: Bipolar
Holding Torque: 0.05Nm(7.1oz.in)
Rated Current/phase: 1.0A
Phase Resistance: 10.0ohms
Inductance: 8.5mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: 35x35mm
Body Length: 20mm
Shaft Diameter: Φ5mm
Shaft Length: 24mm
Number of Leads: 4
Lead Length: 300mm
Weight: 100g
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 0.9 |
| Holding Torque(Nm) | 0.05 |
| Holding Torque(oz.in) | 7.1 |
| Rated Current(A) | 0.4 |
| Phase Resistance(ohm) | 10.0 |
| Phase Inductance(mH) | 8.5 |
| Physical Specification | |
| Frame Size(mm) | 35x35 |
| Body Length(mm) | 20 |
| Shaft Type | Round |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 24 |
| No. of Leads | 4 |
| Lead Length(mm) | 300 |
| Weight(KG) | 0.1 |
