This length of 42mm bipolar nema 14 stepper motor has 4 wires, each phase draws 0.5A with holding torque 0.23Nm (32.6oz.in). A JST connector XH2.54-4PIN is fixed at the terminal cable.
Electrical Specification
Part Number: 35HS42-0504A
Step Angle: 1.8deg
Bi/Unipolar: Bipolar
Holding Torque: 0.23Nm(32.6oz.in)
Rated Current/phase: 0.5A
Phase Resistance: 15ohms
Inductance: 26mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: 35x35mm
Body Length: 42mm
Shaft Diameter: Φ5mm
Shaft Length: 24mm
D-cut Length: 15mm
Number of Leads: 4
Lead Length: 660mm
Weight: 250g
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.23 |
| Holding Torque(oz.in) | 32.6 |
| Rated Current(A) | 0.5 |
| Phase Resistance(ohm) | 15 |
| Phase Inductance(mH) | 26 |
| Physical Specification | |
| Frame Size(mm) | 35x35 |
| Body Length(mm) | 42 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 24 |
| No. of Leads | 4 |
| Lead Length(mm) | 660 |
| Weight(KG) | 0.25 |
