This size 35mm NEMA 14 closed-loop hollow shaft stepper servo motor has a body length 47.5mm including a 1000cpr incremental optilcal encoder, with 1.5A rated current & holding torque 0.13Nm/18.46oz.in. A hollow shaft with outer diameter Φ8mm & inner diameter Φ3.7mm is available and also a double shaft with a front shaft length of 16mm and rear shaft length 7.5mm is designed.
Electrical Specification
- Part Number: 35HS33EC2-K16
- Step Angle: 1.8deg
- Bi/Unipolar: Bipolar
- Holding Torque: 0.13Nm(18.46oz.in)
- Rated Current/phase: 1.5A
- Phase Resistance: 1.8ohms
- Inductance: 1.9mH
- Driving Voltage: 12-24V
Physical Specification
- Frame Size: 35x35mm
- Motor Length: 32.5mm
- Outer Shaft Diameter: Φ8.0mm
- Inner Shaft Diameter: Φ3.7mm
- Front Shaft Length: 16.0mm
- Rear Shaft Length: 7.5mm
- Number of Leads: 4
- Lead Length: 300mm
- Weight: 0.25KG
Encoder Specification
- Encoder Resolution: 1000CPR
- Encoder Type: Incremental
- No. of Leads: 8
- Lead Length: 300mm
- Supply Voltage: 5.0V
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.13 |
| Holding Torque(oz.in) | 18.46 |
| Rated Current(A) | 1.5 |
| Driving Voltage(VDC) | 12-24 |
| Physical Specification | |
| Frame Size(mm) | 35x35 |
| Body Length(mm) | 32.5 |
| Inner Shaft Diameter(mm) | 3.7 |
| Outer Shaft Diameter(mm) | 8.0 |
| Front Shaft Length(mm) | 16.0 |
| Rear Shaft Length(mm) | 7.5 |
| No. of Leads | 4 |
| Lead Length(mm) | 300 |
| Weight(KG) | 0.25 |
| Encoder Specification | |
| Encoder Resolution(CPR) | 1000 |
| Encoder Type | Incremental |
| Supply Voltage(VDC) | 5.0 |
