This is nema 11 stepper motor with step angle 1.8deg and size 28x28x28mm. It has 4 wires, each phase draws 0.67A with holding torque 4.5Ncm.
Electrical Specification
Part Number: 28HS28-0674S
Step Angle: 1.8deg
Bipolar/Unipolar: Bipolar
Holding Torque: 0.03Nm(4.2oz.in)
Rated Current/phase: 0.67A
Phase Resistance: 4.2ohms
Inductance: 2.2mH
Driving Voltage: 12-36VDC
Physical Specification
Frame Size: 28x28mm
Body Length: 28mm
Shaft Diameter: Φ5mm
Shaft Length: 20mm
Shaft Length: 15mm
Number of Leads: 4
Lead Length: 500mm
Weight: 100g
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.03 |
| Holding Torque(oz.in) | 4.2 |
| Rated Current(A) | 0.67 |
| Phase Resistance(ohm) | 12 |
| Phase Inductance(mH) | 5.8 |
| Physical Specification | |
| Frame Size(mm) | 28x28 |
| Body Length(mm) | 28 |
| Shaft Type | D-cut |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 20 |
| No. of Leads | 4 |
| Weight(KG) | 0.11 |
