This small NEMA 14 stepper motor has a step angle 1.8deg or 200 steps/revolution and size 35x35x34mm. It has bipolar 4 wires connection, each phase draws 1.0A with holding torque 0.14Nm.
Electrical Specification
Part Number: FLKH35STH0001
Step Angle: 1.8deg
Bipolar/Unipolar: Bipolar
Holding Torque: 0.14Nm
Rated Current/phase: 1.0A
Phase Resistance: 2.7ohms
Inductance: 4.3mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: 35x35mm
Body Length: 34mm
Shaft Diameter: Φ5mm
Shaft Length: 21mm
D-cut Length: 15mm
Number of Leads: 4
Lead Length: 300mm
Weight: 200g
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.14 |
| Holding Torque(oz.in) | 19.8 |
| Rated Current(A) | 1.0 |
| Phase Resistance(ohm) | 2.7 |
| Phase Inductance(mH) | 4.3 |
| Physical Specification | |
| Frame Size(mm) | 35x35 |
| Body Length(mm) | 34 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 4 |
| Shaft Length(mm) | 21 |
| No. of Leads | 4 |
| Lead Length(mm) | 300 |
| Weight(KG) | 0.2 |
