LEADSHINE M332C Digital Stepper Drive 18-30VDC 1.0-3.2A
Key Features
- Anti-Resonance for optimal torque, extra smooth motion, low motor heating and noise
- Motor auto-identification and parameter auto-configuration for optimal torque from wide-range motors
- Step & Direction (PUL/DIR) control
- Multi-Stepping for smooth motor movement
- Optically isolated inputs
- Input voltage 18-30VDC
- 8 selectable micro-step resolutions of 400-12800 via DIP switches
- 8 selectable output current settings of 1–3.2A via DIP switches
- Soft-start with no "jump" when powered on
- Pulse input frequency up to 60 KHz.
- Automatic idle-current reduction
- Protections for over-voltage and over-current
Electrical Specifications:
- Output Peak Current: 1.0-3.2A (2.3RMS)
- Input Voltage: +12-30VDC (Typical 24VDC)
- Logic Signal Current: 7-16mA (Typical 10mA)
- Pulse Input Frequency: 0-60kHz
- Pulse Width: 7.5μS
- Isolation Resistance: 100MΩ
Operating Environment and other Specifications:
- Cooling: Natural Cooling or Forced cooling
- Environment: Avoid dust, oil fog and corrosive gases
- Ambient Temperature: 0-65℃
- Humidity: 40%-90%RH
- Operating Temperature: 0-50℃
- Vibration: 10-50Hz/0.15mm
- Storage Temperature: -20-65℃
- Weight: 90g
Contact Us
| Drive Specification | |
| Input Voltage(VDC) | 18-30 |
| Output Current(A) | 1.0-3.2 |
| Micro-step Resolutions | 400-12800 |
| Matched Size | NEMA11-NEMA17 |
| Weight(G) | 90 |
