LEADSHINE DM1182 is a drive which can take 80-150 VAC input voltage, and output 0.4-8.2A current. It is capable of driving 2 phase stepper motors of NEMA34 & 42.
Key Features:
- Anti-Resonance provides optimal torque and nulls mid-range instability
- Motor auto-identification and parameter auto-configuration technology, offers optimal responses with different motors
- Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
- Supply voltage up to 150VAC
- Output current programmable, from 0.5A to 8.2A. It can also be set via DIP switches
- Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
- Automatic idle-current reduction
- Suitable for 2-phase and 4-phase motors
- Support PUL/DIR and CW/CCW modes
- Over-voltage, Under-voltage, over-current, phase-error protections
Electrical Specifications:
- Output Peak Current: 0.5-8.2A
- Input Voltage: 80-150VAC
- Logic Signal Current: 7-16 mA (Typical 10mA)
- Pulse Input Frequency: 0-200 kHz
- Isolation Resistance: 500MΩ
Operating Environment and other Specifications:
- Environment: Avoid dust, oil fog and corrosive gases
- Ambient Temperature: 0-50℃
- Humidity: 40%-90%RH
- Operating Temperature(Heat Sink): 70℃ Max
- Storage Temperature: -20-65℃
- Weight: 1300g
Contact Us
| Drive Specification | |
| Input Voltage(VAC) | 80-150 |
| Output Current(A) | 0.5-8.2 |
| Micro-step Resolutions | 400-25600 |
| Matched Size | NEMA34-NEMA42 |
| Weight(G) | 1300 |
