This is bipolar nema 24 stepper motor with step angle 1.8deg and 100mm body length. It has 4 wires, each phase drawing 5A and holding torque 3.5Nm(496oz.in).
Electrical Specification
Part Number: 60HP100-5004S-D10
Step Angle: 1.8deg
Bi/unipolar: Bipolar
Holding Torque: 3.5Nm(496oz.in)
Rated Current/phase: 5.0A
Phase Resistance: 0.48ohms
Inductance: 1.85mH
Driving Voltage: 24-60VDC
Physical Specification
Frame Size: 60x60mm
Body Length: 100m
Shaft Diameter: Φ10mm
Shaft Length: 21mm
D-cut Length: 15mm
Number of Leads: 4
Lead Length: 500mm
Weight: 1.7Kg
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 3.5 |
| Holding Torque(oz.in) | 496 |
| Rated Current(A) | 5.0 |
| Phase Resistance(ohm) | 0.48 |
| Phase Inductance(mH) | 1.85 |
| Physical Specification | |
| Frame Size(mm) | 60x60 |
| Body Length(mm) | 99.5 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 10 |
| Shaft Length(mm) | 21 |
| No. of Leads | 4 |
| Lead Length(mm) | 500 |
| Weight(KG) | 1.7 |
