This NEMA 24 stepper motor has step angle 1.8deg and size 60x60x100mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you wish. It's holding torque reach 2.48Nm(351oz.in) with unipolar connection and 3.4Nm(482oz.in) with bipolar connection.
Electrical Specification
Part Number: 60HS100-3008S
Bi/Unipolar: Bipolar & Unipolar
Step Angle: 1.8 deg
Holding Torque(Bipolar): 3.4Nm(482oz.in)
Holding Torque(Unipolar): 2.48Nm(351oz.in)
Rated Current(Bipolar Serial): 2.0A
Rated Current(Bipolar Parallel): 4.0A
Rated Current(Unipolar): 2.8A
Phase Resistance(Bipolar Serial): 2.8ohms
Phase Resistance(Bipolar Parallel): 0.7ohms
Phase Resistance(Unipolar): 1.4ohms
Inductance(Bipolar Serial): 12.0mH
Inductance(Bipolar Parallel): 3.0mH
Inductance(Unipolar): 3.0mH
Physical Specification
Frame Size: 60x60mm
Body Length: 100mm
Shaft Diameter: Φ8mm
Shaft Length: 24mm
D-cut Length: 20mm
Number of Leads: 8
Lead Length: 400mm
Weight: 1.7kg
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar/Unipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 3.4 |
| Holding Torque(oz.in) | 482 |
| Rated Current(A) | 4.0 |
| Phase Resistance(ohm) | 0.7 |
| Phase Inductance(mH) | 3.0 |
| Physical Specification | |
| Frame Size(mm) | 60x60 |
| Body Length(mm) | 100 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 8 |
| Shaft Length(mm) | 24 |
| No. of Leads | 8 |
| Lead Length(mm) | 400 |
| Weight(KG) | 1.7 |
