This dual shaft bipolar Nema 24 stepper motor has 88mm body length and low current 4.0A with holding torque 3Nm (425oz.in). A length of 15mm rear shaft is available.
Electrical Specification
Part Number: 60HP87-4004D
Step Angle: 1.8deg
Bi/unipolar: Bipolar
Holding Torque: 3.0Nm(425oz.in)
Rated Current/phase: 4.0A
Phase Resistance: 0.9ohms
Inductance: 3.5mH
Driving Voltage: 24-60VDC
Physical Specification
Frame Size: 60x60mm
Body Length: 87mm
Shaft Diameter: Φ8mm
Front Shaft Length: 21mm
D-cut Length: 15mm
Rear Shaft Length: 15mm
D-cut Length: 13mm
Number of Leads: 4
Lead Length: 500mm
Weight: 1.4Kg
Motor Connection
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 3.0 |
| Holding Torque(oz.in) | 425 |
| Rated Current(A) | 4.0 |
| Phase Resistance(ohm) | 0.9 |
| Phase Inductance(mH) | 3.5 |
| Physical Specification | |
| Frame Size(mm) | 60x60 |
| Body Length(mm) | 87 |
| Single Shaft/Dual Shaft | Dual Shaft |
| Front Shaft Length(mm) | 24 |
| Rear Shaft Diameter(mm) | 8 |
| Rear Shaft Length(mm) | 15 |
| No. of Leads | 4 |
| Lead Length(mm) | 500 |
| Weight(KG) | 1.4 |
| Motor Specification | |
| Front Shaft Diameter(mm) | 8 |
