This strong size 28mm NEMA 11 stepper motor has a step angle 1.8deg or 200 steps/revolution and size 28x28x40mm. It has bipolar 4 wires connection, each phase draws 1.0A with a strong holding torque output 0.12Nm.
Electrical Specification
Part Number: FLKH280020
Step Angle: 1.8deg
Bipolar/Unipolar: Bipolar
Holding Torque: 0.12Nm
Rated Current/phase: 1.0A
Phase Resistance: 4.0ohms
Inductance: 3.8mH
Driving Voltage: 12-24VDC
Physical Specification
Frame Size: 28x28mm
Body Length: 40mm
Shaft Diameter: Φ5mm
Shaft Length: 17mm
D-cut Length: 14mm
Number of Leads: 4
Lead Length: 300mm
Weight: 150g
Contact Us
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Step Angle(°) | 1.8 |
| Holding Torque(Nm) | 0.12 |
| Holding Torque(oz.in) | 17.0 |
| Rated Current(A) | 1.0 |
| Phase Resistance(ohm) | 4.0 |
| Phase Inductance(mH) | 3.8 |
| Physical Specification | |
| Frame Size(mm) | 28x28 |
| Body Length(mm) | 40 |
| Shaft Type | D-cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 17 |
| No. of Leads | 4 |
| Lead Length(mm) | 300 |
| Weight(KG) | 0.15 |
